Pizza boxes manufacturers  in Turkey UK Germany USA France Spain Italy

Pizza boxes manufacturers  in Turkey UK Germany USA France Spain Italy

custom logo-printed corrugated pizza boxes: typical factory price ranges (Turkey vs world), the materials & production techniques used, common MOQs / lead-time expectations, and cost drivers you should watch. I’ve pulled recent supplier pages and industry guides to make the numbers realistic. www.kbcprinting.com

Quick price summary (factory / FOB / EXW ranges)

• World (China / SE Asia / global suppliers) — USD ~$0.03 – $0.80 per box for high-volume, simple corrugated pizza boxes (basic kraft or single-colour print; very large MOQs drive the low end). Mid-volume, full-colour or litho-laminated boxes commonly $0.05 – $0.60; small runs or high-end finishes push toward $0.5–$2.0+.  www.kbcprinting.com
• Turkey (local factories / mid-quality to premium) — approx. TRY ~3 – 50+ per box (≈ USD ~$0.10 – $1.5+) depending on size, flute type, printing method and finish. Simple kraft corrugated boxes for pizza at medium volumes are typically in the lower part of this band; litho-laminated or full-colour offset printed boxes are toward the top. Turkish suppliers are competitive for mid-volume orders and faster EU transit. www.kbcprinting.com

These bands overlap because size (8″–18″), quantity, print method, and finishes (laminate, spot UV, grease barrier) dominate final price.

Typical materials & construction

• Flute / board types: E-flute (thin, neat print surface) or B-flute are common for pizza boxes (good stiffness + printable face). Thicker flutes used for extra strength. www.kbcprinting.com
• Face paper / coating: Kraft brown, white-lined kraft, or high-grade kraft with grease-resistant coatings. Grease-proof or food-grade liners available. www.kbcprinting.com
• Grease resistance / food safety: Options include grease-resistant papers or an internal barrier coating to keep oils from bleeding through. Some suppliers use compostable/eco papers. www.kbcprinting.com

Common printing & converting techniques (and when to use them)

• Flexographic (Flexo) printing — the industry workhorse for corrugated at high volumes; cost-effective for 1–3 spot colours or up to CMYK with anilox upgrades. Best for large runs. www.kbcprinting.com
• Litho-lamination (Litho-lam) — offset prints high-quality artwork on paper then laminates it to corrugated. Use when photographic quality or rich graphics are needed (higher cost www.kbcprinting.com
• Digital printing — economical for small runs, variable data, or very short lead times; unit cost higher but tooling/setup negligible. www.kbcprinting.com
• Converting steps: rotary die-cut / creasing / gluing / folding. Some producers preprint sheets then wrap (litho-lam), others print directly (flexo/digital). www.kbcprinting.com

MOQs, lead times & practical notes

• MOQs: Typical factory minimums vary: flexo litho runs commonly expect several thousand (e.g., 2,000–10,000); digital printers can do hundreds. If you want litho-lam or complex full-colour, expect higher MOQs. (Many Turkish corrugated producers quote 5k–10k as common). www.kbcprinting.com
• Lead times: Prototype/sample 3–10 days (depending on complexity); production 7–30+ days depending on qty, printing method and finishing; plus shipping. Turkey often gives quicker transit to EU markets vs Asia. www.kbcprinting.com

Price drivers — what increases cost most

1. Small quantity (low runs) — setup and waste increase per-unit cost.
2. High-quality litho-lam printing or full photographic CMYK (vs simple flexo).
3. Special coatings/grease-resistant papers or food-grade certificates.
4. Custom sizes / special dies, windows or blinds.
5. Rushed lead times and export packing / pallets.

Typical example price scenarios (illustrative)

• Basic kraft corrugated pizza box, brown, 12″ — large volume (30k+): world $0.03–$0.12 / box; Turkey similar at larger volumes but often slightly higher for small/medium runs. www.kbcprinting.com
• Full-colour litho-lam 12″ box, 5k qty: world $0.08–$0.40; Turkey $0.12–$0.90 depending on finish and paper grade. www.kbcprinting.com
• Small runs, digitally printed, bespoke design, 500–2,000 pcs: expect $0.30–$1.50+ per box. www.kbcprinting.com

Where to source / Turkish manufacturers (examples)

• Yasatan Group — corrugated and pizza box products (Turkey). www.kbcprinting.com
• Local printers listed on B2B marketplaces (Alibaba, Made-in-China) show many Turkish and global suppliers — useful for price comparisons and MOQs. www.kbcprinting.com

If you want concrete factory quotes I can pull 3 sample FOB/EXW price estimates (China, Turkey, EU) for three profiles now:
A) Basic kraft 12″ box — 50,000 pcs, flexo, 1-colour.
B) Mid-range 12″ box — 5,000 pcs, full-colour litho-lam.
C) Small-run 12″ box — 1,000 pcs, digital full-colour.

Concrete product examples & pricing in Turkey

Here are some real listings for custom printed pizza / corrugated boxes in Turkey (or Turkish market) to help ground expectations:

Here are a few:

• Pizza Kutusu Kraft (Özel Logo Baskı) — a kraft pizza box with custom logo, priced at ₺8.55 (single box listing)
• Özel Baskılı Beyaz Pizza Kutusu 38×38×4 cm — white pizza box, custom printed, for 1,000 pcs, ₺16,589 total (so ≈ ₺16.59 per unit)
• Özel Firma Logo Baskılı Kraft Pizza Kutusu 36×36 — a 36×36 cm kraft box, 1,000 unit order, priced ₺12,500 (≈ ₺12.50 per unit)

These indicate that for smaller runs, per-unit costs in Turkey for custom printed pizza boxes can be in the ballpark of ₺8 – ₺20+ depending on size, finishing, and print complexity.

More on materials, construction & design trade-offs

To choose or design well, you must understand trade-offs. Here are advanced nuances and decisions:

Board / Corrugated Construction

• Flute type & wall structure
  • Single-wall (one flute) is standard for many pizza boxes.
  • Flute selection (B, C, E, etc.) matters: finer flutes (E) give smoother print surface, but are thinner structurally; coarser flutes (C) give more cushioning/stiffness.
  • Double-wall or reinforced edges may be used if the pizza box also needs to stack under weight or for heavier pizzas.
• Face liner / paper quality
  • Kraft brown liner is cheapest & gives that rustic look.
  • White-lined or bleached liner (white interior or exterior) for better visual appeal or print contrast.
  • Grease-resistant / food-grade coating on the interior side (to stop oil leaking through).
  • Barrier coatings (e.g. PLA, wax, silicone) to resist moisture or steam.
• Board weight / gsm
  • Higher grammage liners or thicker flutes cost more, but contribute to durability.
  • You may specify e.g. 200–300 gsm face papers, plus the corrugated core.

Printing & Finishing Options

• Flexographic printing
  • Good for moderate to high volumes, with spot colours or limited colour ranges. Economical and efficient.
  • But colour reproduction is less precise than offset/litho or litho-lamination.
• Litho-lamination (Litho-lam) / offset + lamination
  • Print quality is higher (photo, gradient, sharp details).
  • The printed sheet is bonded (laminated) onto corrugated board.
  • More expensive in setup and materials.
• Digital printing
  • Good for short runs, variable data, prototyping.
  • Per unit cost is higher, but avoids large setup costs.
• Surface finishes / treatments
  • Matte or gloss laminate, soft-touch surfaces
  • Spot UV or varnish for accent regions
  • Foil stamping or metallic inks (rare in pizza boxes because of cost, but possible for premium brands)
  • Embossing / debossing (less common in mass pizza boxes, but used for premium packaging)
  • Perforations / ventilation holes (often needed for steam release)

Box design & structure

• Box size / format — 8″, 10″, 12″, 14″, 16″, 18″, or custom sizes
• Top closure style — tuck-in, lock flap, interlocking tabs
• Stackability / strength — boxes must support stacking (if deliveries are stacked)
• Print layout & bleed / margin considerations
• Vent holes / slits — to allow steam escape
• Flat packing vs preassembled — shipping art cost differs

Protective & functional features

• Grease block / internal barrier
• Cut liners or dividers (for slices, inserts)
• Windows (plastic film windows) — rare for pizza, but possible
• Reinforcements — extra flaps or double layers at corners
• Embossed branding or texture — more decorative / premium

Cost structure & markup (how factories price)

Factories typically break down cost into several components. Understanding them helps you negotiate better.

In low-volume orders, setup & tooling play a large role in price; in large orders, raw material and printing dominate.

Global / Turkey market data & supplier insights

• A Turkish corrugated pizza box manufacturer Yasatan says they produce “any size” Turkish pizza boxes and invite you to contact for wholesale pricing. www.kbcprinting.com

• On B2B sites, “Pizza Box · Corrugated Tray Boxes. FOB Price: (Negotiable)” is listed for Turkish suppliers. www.kbcprinting.com
• In general carton / corrugated box category, some Turkish suppliers list USD 0.66 / piece for offset printed carton boxes. www.kbcprinting.com
• On Turkey-oriented listings for pizza boxes: many listings show $0.25 – $0.30 per box (for specific quantities / designs) for Turkish pizza box options. www.kbcprinting.com
• For waterproof or coated pizza boxes from China, sample pricing often shows ~ US$0.05 for large runs up to US$0.50 for small runs. www.kbcprinting.com

So globally, the very cheap unit cost is reachable for simple, high-volume designs. But once you add print complexity, coatings, special board types, the shipping, the cost rises.

Sourcing strategy & quote checklist

Here is a checklist / template you (or your team) can use when reaching out to factories — this helps compare quotes apples-to-apples.

Essential info to include in your RFQ (request for quotation):

1. Dimensions / Size
   • Internal dimensions (length × width × depth)
   • Tolerance (± mm)
   • Box open or closed height
2. Material / Board Type
   • Flute type (B, C, E, double wall, etc.)
   • Liner type (kraft, white-lined, high-bleed, coated)
   • Board weight (gsm)
   • Whether grease-resistant or barrier coated interior
3. Printing & Branding Details
   • Number of colours (spot colours or CMYK full colour)
   • Print inside vs outside
   • Pantone / brand colour matching requirement
   • Artwork file formats (AI, PDF, etc.)
4. Finishing Options
   • Lamination: matte / gloss / soft touch
   • Varnish or spot UV
   • Embossing / debossing
   • Foil stamping
   • Vent holes, perforations
   • Windows (if any)
5. Quantity / Order Volume
   • Trial order (small qty)
   • Forecast volumes / reorder expectations
6. Sample / Prototype Requirements
   • Do you want a physical mock-up / prototype?
   • Cost of sample (who bears it)
   • Lead time for sample
7. Packing & Shipping
   • Flat packed vs assembled
   • Packaging standard / inner wrap / palletization
   • Shipping port or delivery address
   • Terms: EXW / FOB / CIF / DDP
8. Quality Standards / Certifications
   • Food safety (for pizza) / hygiene / certifications
   • Inspection criteria (print alignment, glue strength, dimensional tolerance, integrity under stacking)
   • Acceptable reject rate
9. Lead Time / Delivery Schedule
   • Desired production start date
   • Delivery deadline
   • Penalties (if relevant)
10. Payment Terms
    • Deposit (e.g. 30-50% upfront), balance upon shipment
    • Methods (T/T, L/C, PayPal, etc.)
    • Sample cost handling

Using this form will force factories to give comparable proposals, and you’ll see which ones have hidden costs.

Risks, pitfalls & quality checks

When dealing with custom printed corrugated pizza boxes (especially internationally), be cautious about:

• Misleading CIF/FOB quotes — Some suppliers quote “per box” assuming a 20–40 ft container, but hidden freight or packaging costs may be large.
• Print quality / colour mismatch — The factory may not match your brand colours exactly. Insist on proofs / color bars / test runs.
• Inadequate grease resistance — Pizza boxes must resist oil seepage; a poor barrier will lead to soggy boxes and reputational damage.
• Warping or structural weakness — Over time, moisture or steam can weaken poorly constructed boxes. Use proper board and venting.
• Minimum order quantities (MOQ) & waste costs — Some factories force high MOQ to amortize tooling.
• Intellectual property / design copying — Use NDAs if design is proprietary.
• LLP (Least Load Palletization) / inefficient packing — If boxes don’t pack well, shipping costs may surge.
• Customs / regulations — Food packaging may have sanitary / safety regulations in your import country.